Klein Tools - For Professionals Since 1857

Digital Multimeter Electrical Test Kit

MM320KIT

  • Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
  • Meter also test batteries, diodes and continuity
  • Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
  • Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
  • ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
  • Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
  • RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
  • Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device
Images
Hi-Res JPG mm320kit_photo.jpg

The MM320KIT Digital Multimeter Electrical Test Kit from Klein Tools is designed with reliability and safety in mind. This comprehensive kit comes with MM320 Digital Multimeter, NCVT-3P Non-Contact Voltage Tester with Torch, ET45 Voltage Tester, RT210 GFCI Receptacle Tester, a padded storage pouch and all required batteries. All offered in one kit for value and convenience.

Specifications
Type:
Digital Multimeter Electrical Kit
Application:
Measures up to 600V AC/DC voltage, 10A DC current and 2 MΩ resistance. Tests Batteries, Diodes and Continuity
Special Features:
Auto Power-Off on MM320 Multimeter
Material:
ABS/Electronics
Batteries:
2 x AAA
Drop Protection:
3.3' (1 m)
Display:
MM320: 2000 Count LCD
Functions:
Hold
Voltage:
600 V AC/DC
Current:
10 A
Ohms (Resistance):
2 MΩ
Standard:
CAT III 600V; CE
Included:
MM320 Manual Ranging Digital Multimeter, NCVT-3P Dual Range Non-Contact Voltage Tester with Torch, ET45 AC/DC Voltage Tester, RT210 GFCI Receptacle Tester, Carrying Case, Instructions and All Needed Batteries
Overall Length:
6.39'' (162.4 cm)
Overall Height:
1.80'' (45.7 cm)
Overall Width:
3.12'' (79.4 cm)
Weight:
8.2 oz (231 g)
UPC:
092644693403
Additional Information
Warnings
  • Do not attempt to measure resistance or continuity on live circuits.
  • Read, understand and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use.
  • Before each use, verify the meter operation by measuring a known voltage or current.
  • Do not use the meter during electrical storms or in wet weather, and do not use the meter or test leads if they appear to be damaged.