Digital Multimeter Electrical Test Kit

MM320KIT

  • Digital Multimeter measures up to 600V AC/DC voltage, 10A DC current and 2 ohm resistance
  • Meter also test batteries, diodes and continuity
  • Voltage Tester NCVT-3P has dual-range capabilities to detect from 12 to 1000V AC or 70 to 1000V AC for a broad variety of low-voltage or standard voltage applications
  • Bright torch illuminates work area and may be used independent of the NCVT-3P voltage detection function
  • ET45 tests AC voltages from 28V to 240V AC at four useful levels aligned with commonly used residential voltages, and DC voltages from 32V to 330V at four common levels
  • Built-in test lead holders on back of ET45 hold the leads in one of two positions: one so that they are spaced correctly to test tamper-resistant US-style outlets; and the other for the convenient storage of the test leads
  • RT210 detects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
  • Receptacle tester works on GFCI outlets and confirms the operation of the ground fault protective device

The MM320KIT Digital Multimeter Electrical Test Kit from Klein Tools is designed with reliability and safety in mind. This comprehensive kit comes with MM320 Digital Multimeter, NCVT-3P Non-Contact Voltage Tester with Torch, ET45 Voltage Tester, RT210 GFCI Receptacle Tester, a padded storage pouch and all required batteries. All offered in one kit for value and convenience.

Specifications
Type:
Digital Multimeter Electrical Kit
Application:
Multimeter Measures up to 600V AC/DC Voltage, 10A DC Current and 2MΩ Resistance. Tests Batteries, Diodes and Continuity
Special Features:
MM320: Auto Power-Off
Material:
ABS/Electronics
Batteries:
2 x AAA
Drop Protection:
3.3' (1 m)
Display:
MM320: 2000 Count LCD
Functions:
Hold
Voltage:
600 V AC/DC
Current:
10 A
Ohms (Resistance):
2 MΩ
Standard:
CAT III 600V; CE
Included:
MM320 Auto-Ranging Digital Multimeter with Right-Angle Test Leads; NCVT3P Dual Range Non-Contact Voltage Tester with Torch; ET45 AC/DC Voltage Tester; RT210 GFCI Receptacle Tester; Carrying Case; Instructions and All Required Batteries
Overall Length:
6.39'' (162.4 cm)
Overall Height:
1.80'' (45.7 cm)
Overall Width:
3.12'' (79.4 cm)
Weight:
8.2 oz (231 g)
UPC:
092644693403
Additional Information
Warnings
  • Do not attempt to measure resistance or continuity on live circuits.
  • Read, understand and follow all instructions, cautions and warnings attached to and/or packed with all test and measurement devices before each use.
  • Before each use, verify the meter operation by measuring a known voltage or current.
  • Do not use the meter during electrical storms or in wet weather, and do not use the meter or test leads if they appear to be damaged.